What is the mixing ratio for Bar & Table Top and Deep Pour Epoxy?

It depends on which UltraClear epoxy you're using.

UltraClear Bar & Table Top Epoxy mixes 1:1 by volume, equal parts resin and hardener. For example, 8 oz of resin plus 8 oz of hardener makes 16 oz of mixed epoxy, enough for about 6 sq ft as a seal coat or 2 sq ft as a flood coat.

UltraClear Deep Pour Epoxy mixes 2:1 by volume, two parts resin to one part hardener.

UltraClear Art & Craft Epoxy mixes 1:1 by volume, the same as Bar & Table Top.

Kit sizes don't change the ratio. The Bar & Table Top Epoxy formula is still 1:1; a 1 Quart Combined kit, for instance, is a pint of resin and a pint of hardener. Only Deep Pour Epoxy uses the 2:1 ratio.

Nothing comes premixed. All of our epoxies are two-part systems: you receive resin and hardener and mix the two together to activate the product, and both products have to be mixed at the correct ratio to cure properly. If you're using Deep Pour for a river or deeper section, top coat it with Bar & Table Top Epoxy for a durable, protective surface.

Full mixing instructions: Bar & Table Top Epoxy: https://cdn.shopify.com/s/files/1/0320/7168/0140/files/Epoxy-Instructions.pdf?v=1616443869 Deep Pour Epoxy: https://ultraclear.helpscoutdocs.com/article/840-deep-pour-epoxy-instructions Tutorial videos: https://www.bestbartopepoxy.com/tutorial-videos/