Application & Technique
- UltraClear Art & Craft Epoxy Instructions
- How long can I wait between the seal coat and the flood coat?
- Which epoxy should I use to fill cracks, knot holes, and voids in wood?
- Can I brush the epoxy on instead of pouring it?
- How do I remove epoxy drips from under the edge of my table?
- How many seal coats do I need, and do I sand between them?
- Can I pour another coat over epoxy that has already cured?
- Can I clean and reuse epoxy mixing containers, brushes, and stir sticks?
- Should I apply the seal coat with a brush or a roller?
- Do I need to sand between epoxy coats, and what grit should I use?
- Can I Pour Multiple Layers of Epoxy to Build Up Thickness?
- Can the epoxy repair a cracked sink, chipped marble, granite, or plastic?
- Where are the instructions and videos if none came in my box?
- Can I brush UltraClear epoxy onto a vertical or rounded surface?
- Which epoxy do I use over pennies or bottle caps, and how thick?
- Which epoxy should I use to embed objects, and do I seal them first?
- When should I remove the tape dam after pouring epoxy?
- Which epoxy do I use for a 1/4 inch to 1 inch pour?
- Can I apply a thin coat of epoxy, or is 1/8 inch the minimum?
- How do I pour epoxy thicker than 1/8 inch on a floor or embed rocks?
No results found