Do you sell molds or forms for epoxy tables and castings?

No, we don't sell pre-made molds, but you have two easy options.

Silicone molds. UltraClear Epoxy works well in silicone molds, and you can find them for coasters, tiles, and castings by searching "silicone epoxy molds" on Amazon or Google.

Build your own form with epoxy tape. This is what you see in our videos: the white sheeting with blue print is wood covered in our epoxy edge tape (Tyvek tape). Cured epoxy doesn't bond to the tape, so the form pulls away cleanly after the pour has cured, and you can make a dam in any size or shape you need. To build one:

1. Use 2x4s or any sturdy, straight boards for the walls. 2. Cover the entire face of each board that will touch the epoxy. Any exposed wood will stick and the form won't release flawlessly. 3. Seal the seams with silicone caulk so epoxy can't leak between the form and your project. Keep silicone off the work surface itself, because it can keep the epoxy from adhering.

Epoxy edge tape: https://www.bestbartopepoxy.com/collections/tools-supplies/products/epoxy-edge-tape Temporary dam guide: https://ultraclear.helpscoutdocs.com/article/223-temporary-dam-epoxy Our River Table tutorial video shows the form being built: https://www.bestbartopepoxy.com/tutorial-videos/

Which epoxy goes in the mold depends on depth: Bar & Table Top Epoxy for 1/8" pours, Art & Craft Epoxy for up to 1/4", and Deep Pour Epoxy for pours 1/4" and thicker.